
Crux VRFGM-80J Front and Rear View Camera Integration Interface Fit GM LAN 29-Bit Vehicles 2006-2015
Crux VRFGM-80J Front and Rear View Camera Integration Interface Compatible Fit for GM LAN 29-Bit Vehicles 2006-2015
The Crux RFM-GM29 is a Front and rear View Integration Interface for GM LAN 29-bit Vehicles. This interface provides three video inputs: a front input, a rear input, and an additional input for another camera or video source. The system seamlessly integrates with the factory-installed system and uses the factory steering wheel control buttons to force view the aftermarket cameras and/or video source.
General Features:
- It adds a front and rear camera input, as well as an additional video input for another camera or video source*.
- It uses a factory steering wheel control button to force a view of the aftermarket cameras and/or video source.
- Ability to toggle from the backup camera to the extra video input while in reverse gear.
- Perfect for adding a cargo or trailer camera.
- Plug and play installation.
- *Factory Audio Aux Input is required if video input will be used for AV sources.
- Dimensions: 3.5"L x 2.5"W x 7"H
Compatibility:
BUICK
- 2008-2015 Enclave
- 2006-2011 Lucerne
CADILLAC
- 2006-2009 DTS
- 2007-2014 Escalade
- 2007-2009 SRX
CHEVROLET
- 2007-2013 Avalanche
- 2007-2008 Equinox
- 2008-2013 Express Van
- 2006-2013 Impala / Impala SS
- 2006-2007 Monte Carlo
- 2007-2013 Silverado 1500-3500 Pickup
- 2007-2014 Suburban
- 2007-2014 Tahoe
- 2009-2015 Traverse
NOTE1:
To toggle between the the backup camera and the extra video input (,e.g., cargo camera) while in reverse gear, press and hold the SRCE button for 2-3 seconds to enter this mode;. A quick press of the same button will then toggle to the cargo camera.
NOTE 2:
A forced view of the backup camera is only available if an aftermarket backup camera is used.
NOTE 3:
If your vehicle does not have a factory backup camera, you must have the radio coded for a backup camera at the dealership before using the VRFGM-80J.
GMC
- 2007-2015 Acadia
- 2008-2013 Savana
- 2007-2013 Sierra 1500-3500 Pickup
- 2007-2014 Yukon
HUMMER
- 2008-2009 H2
PONTIAC
- 2007-2009 Torrent
SATURN
- 2007-2010 Outlook
- 2008-2009 Vue
SUZUKI
- 2007-2008 XL7
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Crux VRFGM-80J Front and Rear View Camera Integration Interface Compatible Fit for GM LAN 29-Bit Vehicles 2006-2015
The Crux RFM-GM29 is a Front and rear View Integration Interface for GM LAN 29-bit Vehicles. This interface provides three video inputs: a front input, a rear input, and an additional input for another camera or video source. The system seamlessly integrates with the factory-installed system and uses the factory steering wheel control buttons to force view the aftermarket cameras and/or video source.
General Features:
- It adds a front and rear camera input, as well as an additional video input for another camera or video source*.
- It uses a factory steering wheel control button to force a view of the aftermarket cameras and/or video source.
- Ability to toggle from the backup camera to the extra video input while in reverse gear.
- Perfect for adding a cargo or trailer camera.
- Plug and play installation.
- *Factory Audio Aux Input is required if video input will be used for AV sources.
- Dimensions: 3.5"L x 2.5"W x 7"H
Compatibility:
BUICK
- 2008-2015 Enclave
- 2006-2011 Lucerne
CADILLAC
- 2006-2009 DTS
- 2007-2014 Escalade
- 2007-2009 SRX
CHEVROLET
- 2007-2013 Avalanche
- 2007-2008 Equinox
- 2008-2013 Express Van
- 2006-2013 Impala / Impala SS
- 2006-2007 Monte Carlo
- 2007-2013 Silverado 1500-3500 Pickup
- 2007-2014 Suburban
- 2007-2014 Tahoe
- 2009-2015 Traverse
NOTE1:
To toggle between the the backup camera and the extra video input (,e.g., cargo camera) while in reverse gear, press and hold the SRCE button for 2-3 seconds to enter this mode;. A quick press of the same button will then toggle to the cargo camera.
NOTE 2:
A forced view of the backup camera is only available if an aftermarket backup camera is used.
NOTE 3:
If your vehicle does not have a factory backup camera, you must have the radio coded for a backup camera at the dealership before using the VRFGM-80J.
GMC
- 2007-2015 Acadia
- 2008-2013 Savana
- 2007-2013 Sierra 1500-3500 Pickup
- 2007-2014 Yukon
HUMMER
- 2008-2009 H2
PONTIAC
- 2007-2009 Torrent
SATURN
- 2007-2010 Outlook
- 2008-2009 Vue
SUZUKI
- 2007-2008 XL7
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
Crux VRFGM-80J Front and Rear View Camera Integration Interface Compatible Fit for GM LAN 29-Bit Vehicles 2006-2015
The Crux RFM-GM29 is a Front and rear View Integration Interface for GM LAN 29-bit Vehicles. This interface provides three video inputs: a front input, a rear input, and an additional input for another camera or video source. The system seamlessly integrates with the factory-installed system and uses the factory steering wheel control buttons to force view the aftermarket cameras and/or video source.
General Features:
- It adds a front and rear camera input, as well as an additional video input for another camera or video source*.
- It uses a factory steering wheel control button to force a view of the aftermarket cameras and/or video source.
- Ability to toggle from the backup camera to the extra video input while in reverse gear.
- Perfect for adding a cargo or trailer camera.
- Plug and play installation.
- *Factory Audio Aux Input is required if video input will be used for AV sources.
- Dimensions: 3.5"L x 2.5"W x 7"H
Compatibility:
BUICK
- 2008-2015 Enclave
- 2006-2011 Lucerne
CADILLAC
- 2006-2009 DTS
- 2007-2014 Escalade
- 2007-2009 SRX
CHEVROLET
- 2007-2013 Avalanche
- 2007-2008 Equinox
- 2008-2013 Express Van
- 2006-2013 Impala / Impala SS
- 2006-2007 Monte Carlo
- 2007-2013 Silverado 1500-3500 Pickup
- 2007-2014 Suburban
- 2007-2014 Tahoe
- 2009-2015 Traverse
NOTE1:
To toggle between the the backup camera and the extra video input (,e.g., cargo camera) while in reverse gear, press and hold the SRCE button for 2-3 seconds to enter this mode;. A quick press of the same button will then toggle to the cargo camera.
NOTE 2:
A forced view of the backup camera is only available if an aftermarket backup camera is used.
NOTE 3:
If your vehicle does not have a factory backup camera, you must have the radio coded for a backup camera at the dealership before using the VRFGM-80J.
GMC
- 2007-2015 Acadia
- 2008-2013 Savana
- 2007-2013 Sierra 1500-3500 Pickup
- 2007-2014 Yukon
HUMMER
- 2008-2009 H2
PONTIAC
- 2007-2009 Torrent
SATURN
- 2007-2010 Outlook
- 2008-2009 Vue
SUZUKI
- 2007-2008 XL7
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.





















