🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

SKB 3i-4214-OP iSeries Waterproof Open Cavity Electric Guitar Flight Case

Product image 1
1 / 12
+7

SKB 3i-4214-OP iSeries Waterproof Open Cavity Electric Guitar Flight Case

SKB 3i-4214-OP iSeries Waterproof Open Cavity Electric Guitar Flight Case

The iSeries 4214-OP Open Cavity Electric Guitar case accommodates a wider variety of body shapes, and features a platinum plush interior that provides total neck support and protection on all sides.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

General Features:

  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)
  • Automatic ambient pressure equalization value (MIL-STD 810H)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.
  • Reinforced locking loops for customer supplied locks
  • Rubber over-molded cushion grip carrying handle and pull handle
  • Convenient quiet-glide wheels
  • Large accessory compartment
  • Platinum plush lined interior with open cavity for a variety of body shapes
  • Total neck support
  • Accessory compartments

Specifications:

Exterior Hard
Built In Wheels or Casters Yes
Overall Length 40.75 in 103.5 cm
Body Length 17.25 in 43.81 cm
Body Depth 3.125 in 7.93 cm
Upper Bout 13.25 in 33.65 cm
Lower Bout 13.25 in 33.65 cm
Product Weight 18.67 lb 8.47 kg
Exterior Length 45 in 114.3 cm
Exterior Width 17 in 43.18 cm
Exterior Height 6.25 in 15.87 cm
Carton Length 46 in 116.84 cm
Carton Width 17.5 in 44.45 cm
Carton Height 7 in 17.78 cm
Shipping Weight 20.95 lb 9.5 kg


Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

SKB 3i-4214-OP iSeries Waterproof Open Cavity Electric Guitar Flight Case

The iSeries 4214-OP Open Cavity Electric Guitar case accommodates a wider variety of body shapes, and features a platinum plush interior that provides total neck support and protection on all sides.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

General Features:

  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)
  • Automatic ambient pressure equalization value (MIL-STD 810H)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.
  • Reinforced locking loops for customer supplied locks
  • Rubber over-molded cushion grip carrying handle and pull handle
  • Convenient quiet-glide wheels
  • Large accessory compartment
  • Platinum plush lined interior with open cavity for a variety of body shapes
  • Total neck support
  • Accessory compartments

Specifications:

Exterior Hard
Built In Wheels or Casters Yes
Overall Length 40.75 in 103.5 cm
Body Length 17.25 in 43.81 cm
Body Depth 3.125 in 7.93 cm
Upper Bout 13.25 in 33.65 cm
Lower Bout 13.25 in 33.65 cm
Product Weight 18.67 lb 8.47 kg
Exterior Length 45 in 114.3 cm
Exterior Width 17 in 43.18 cm
Exterior Height 6.25 in 15.87 cm
Carton Length 46 in 116.84 cm
Carton Width 17.5 in 44.45 cm
Carton Height 7 in 17.78 cm
Shipping Weight 20.95 lb 9.5 kg


Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

$161.00

Original: $459.99

-65%
SKB 3i-4214-OP iSeries Waterproof Open Cavity Electric Guitar Flight Case

$459.99

$161.00

Description

SKB 3i-4214-OP iSeries Waterproof Open Cavity Electric Guitar Flight Case

The iSeries 4214-OP Open Cavity Electric Guitar case accommodates a wider variety of body shapes, and features a platinum plush interior that provides total neck support and protection on all sides.

This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage.

SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).

General Features:

  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)
  • Automatic ambient pressure equalization value (MIL-STD 810H)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.
  • Reinforced locking loops for customer supplied locks
  • Rubber over-molded cushion grip carrying handle and pull handle
  • Convenient quiet-glide wheels
  • Large accessory compartment
  • Platinum plush lined interior with open cavity for a variety of body shapes
  • Total neck support
  • Accessory compartments

Specifications:

Exterior Hard
Built In Wheels or Casters Yes
Overall Length 40.75 in 103.5 cm
Body Length 17.25 in 43.81 cm
Body Depth 3.125 in 7.93 cm
Upper Bout 13.25 in 33.65 cm
Lower Bout 13.25 in 33.65 cm
Product Weight 18.67 lb 8.47 kg
Exterior Length 45 in 114.3 cm
Exterior Width 17 in 43.18 cm
Exterior Height 6.25 in 15.87 cm
Carton Length 46 in 116.84 cm
Carton Width 17.5 in 44.45 cm
Carton Height 7 in 17.78 cm
Shipping Weight 20.95 lb 9.5 kg


Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.