SKB 3i-261712HD8 iSeries 2617-12 Blackmagic Design ATEM TV Studio HD8/4K8 Case
SKB 3i-261712HD8 iSeries 2617-12 Blackmagic Design ATEM TV Studio HD8/4K8 Case
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8, HD8 ISO, or 4K8. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Fit’s Blackmagic Design ATEM Television Studio HD8/HD8 ISO/4K8
- Large (22” x 8” x 4.875”) accessory pocket for power supply and other accessories
- Built-in pull handle and two inch wide wheels
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H
- Automatic ambient pressure equalization value (MIL-STD 810H)
- Resistant to corrosion and impact damage
- Protected hinges with stainless steel pins
- Five patented "trigger release" Latches
- Adaptable for TSA locks
- Rubber over-molded cushion grip handles
- Oversized double grip carrying handle
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | Yes | |
| Product Weight | 20 lb | 9.07 kg |
| Exterior Length | 28.625 in | 72.7 cm |
| Exterior Width | 20.25 in | 51.43 cm |
| Exterior Height | 13.5 in | 34.29 cm |
| Carton Length | 29.5 in | 74.93 cm |
| Carton Width | 20.5 in | 52.07 cm |
| Carton Height | 14 in | 35.56 cm |
| Shipping Weight | 22.69 lb | 10.29 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
SKB 3i-261712HD8 iSeries 2617-12 Blackmagic Design ATEM TV Studio HD8/4K8 Case
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8, HD8 ISO, or 4K8. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Fit’s Blackmagic Design ATEM Television Studio HD8/HD8 ISO/4K8
- Large (22” x 8” x 4.875”) accessory pocket for power supply and other accessories
- Built-in pull handle and two inch wide wheels
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H
- Automatic ambient pressure equalization value (MIL-STD 810H)
- Resistant to corrosion and impact damage
- Protected hinges with stainless steel pins
- Five patented "trigger release" Latches
- Adaptable for TSA locks
- Rubber over-molded cushion grip handles
- Oversized double grip carrying handle
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | Yes | |
| Product Weight | 20 lb | 9.07 kg |
| Exterior Length | 28.625 in | 72.7 cm |
| Exterior Width | 20.25 in | 51.43 cm |
| Exterior Height | 13.5 in | 34.29 cm |
| Carton Length | 29.5 in | 74.93 cm |
| Carton Width | 20.5 in | 52.07 cm |
| Carton Height | 14 in | 35.56 cm |
| Shipping Weight | 22.69 lb | 10.29 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Original: $704.99
-65%$704.99
$246.75Description
SKB 3i-261712HD8 iSeries 2617-12 Blackmagic Design ATEM TV Studio HD8/4K8 Case
The iSeries 3i-261712HD8 was designed to fit the Blackmagic Design ATEM Television Studio HD8, HD8 ISO, or 4K8. The case interior features high quality foam that has been form cut to fit the switcher with a large additional pocket (measuring 22"x 8”x 4.875”) below for the power supply and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Fit’s Blackmagic Design ATEM Television Studio HD8/HD8 ISO/4K8
- Large (22” x 8” x 4.875”) accessory pocket for power supply and other accessories
- Built-in pull handle and two inch wide wheels
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H
- Automatic ambient pressure equalization value (MIL-STD 810H)
- Resistant to corrosion and impact damage
- Protected hinges with stainless steel pins
- Five patented "trigger release" Latches
- Adaptable for TSA locks
- Rubber over-molded cushion grip handles
- Oversized double grip carrying handle
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | Yes | |
| Product Weight | 20 lb | 9.07 kg |
| Exterior Length | 28.625 in | 72.7 cm |
| Exterior Width | 20.25 in | 51.43 cm |
| Exterior Height | 13.5 in | 34.29 cm |
| Carton Length | 29.5 in | 74.93 cm |
| Carton Width | 20.5 in | 52.07 cm |
| Carton Height | 14 in | 35.56 cm |
| Shipping Weight | 22.69 lb | 10.29 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
