SKB 3i-2011-10SN iSeries Sony HXR-NX800 PXW-Z200 Camcorder Case
SKB 3i-2011-10SN iSeries Sony HXR-NX800 PXW-Z200 Camcorder Case
The 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut foam interior for Sony HXR-NX800 or PXW-Z200
- Battery compartment fits either BP-U35, BP-U70, or BP-U100
- BC-U2A, PTD-FP1, and four accessory pockets
- Pull handle & wheels
- Waterproof and dust tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger release latch system
- Accepts SKB’s TSA combination padlocks
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810H)
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | Yes | |
| Product Weight | 14 lb | 6.35 kg |
| Exterior Length | 22 in | 55.88 cm |
| Exterior Width | 14 in | 35.56 cm |
| Exterior Height | 12 in | 30.48 cm |
| Carton Length | 22.5 in | 57.15 cm |
| Carton Width | 13 in | 33.02 cm |
| Carton Height | 14.5 in | 36.83 cm |
| Shipping Weight | 17.2 lb | 7.8 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
SKB 3i-2011-10SN iSeries Sony HXR-NX800 PXW-Z200 Camcorder Case
The 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut foam interior for Sony HXR-NX800 or PXW-Z200
- Battery compartment fits either BP-U35, BP-U70, or BP-U100
- BC-U2A, PTD-FP1, and four accessory pockets
- Pull handle & wheels
- Waterproof and dust tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger release latch system
- Accepts SKB’s TSA combination padlocks
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810H)
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | Yes | |
| Product Weight | 14 lb | 6.35 kg |
| Exterior Length | 22 in | 55.88 cm |
| Exterior Width | 14 in | 35.56 cm |
| Exterior Height | 12 in | 30.48 cm |
| Carton Length | 22.5 in | 57.15 cm |
| Carton Width | 13 in | 33.02 cm |
| Carton Height | 14.5 in | 36.83 cm |
| Shipping Weight | 17.2 lb | 7.8 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
SKB 3i-2011-10SN iSeries Sony HXR-NX800 PXW-Z200 Camcorder Case
The 3i-2011-10SN was designed to fit the Sony HXR-NX800 or PXW-Z200 Camcorder. The interior of the case is made from high quality EPE foam that holds the camera with or without the battery installed, and features additional space for the BC-U2A battery charger, PTD-FP1 data transmitter, two batteries, and four accessory compartments. The battery slots fit the BP-U35, BP-U70 or BP-U100 (using precut pull-out foam blocks). The accessory pocket measures 1.8” x 1.8” x 1.75” in the upper left of the case, 8.09” x 1.47” x 7.625” in the bottom left, 6” x 1.91” x 5.5” in the upper right, and 2.85” x 2.44” x 7.625” in the middle right side.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, patented trigger release latches, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut foam interior for Sony HXR-NX800 or PXW-Z200
- Battery compartment fits either BP-U35, BP-U70, or BP-U100
- BC-U2A, PTD-FP1, and four accessory pockets
- Pull handle & wheels
- Waterproof and dust tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger release latch system
- Accepts SKB’s TSA combination padlocks
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810H)
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | Yes | |
| Product Weight | 14 lb | 6.35 kg |
| Exterior Length | 22 in | 55.88 cm |
| Exterior Width | 14 in | 35.56 cm |
| Exterior Height | 12 in | 30.48 cm |
| Carton Length | 22.5 in | 57.15 cm |
| Carton Width | 13 in | 33.02 cm |
| Carton Height | 14.5 in | 36.83 cm |
| Shipping Weight | 17.2 lb | 7.8 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
