SKB 3i-1813-7WMC iSeries 1813-7 Wireless Eight Mic Case
SKB 3i-1813-7WMC iSeries 1813-7 Wireless Eight Mic Case
The 3i-1813-7WMC Wireless Mic case is part of the Waterproof Series of cases with a custom foam interior to protect a variety of brands including Shure and Sennheiser mics to name a few.
This dual layer custom foam interior is designed to cradle each mic and will fit up to eight handheld wireless microphones, eight wireless body pack transmitters and accessories. Convenient finger holes to quickly grab the microphone and easily slide in the body pack transmitters on their side to protect the antenna. An open pocket is perfect to hold mic clips, batteries and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom dual layer foam interior to hold eight wireless mics, body packs and accessories
- Convenient finger slots for easy access
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)
- Automatic ambient pressure equalization value (MIL-STD 810H)
- Resistant to corrosion and impact damage
- Molded-in hinges
- Trigger Latch® System
- Rubber over-molded cushion grip handle
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 9.7 lb | 4.4 kg |
| Exterior Length | 19.875 in | 50.48 cm |
| Exterior Width | 15.5 in | 39.37 cm |
| Exterior Height | 7.875 in | 20.0 cm |
| Carton Length | 20 in | 50.8 cm |
| Carton Width | 16 in | 40.64 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 10.88 lb | 4.94 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
SKB 3i-1813-7WMC iSeries 1813-7 Wireless Eight Mic Case
The 3i-1813-7WMC Wireless Mic case is part of the Waterproof Series of cases with a custom foam interior to protect a variety of brands including Shure and Sennheiser mics to name a few.
This dual layer custom foam interior is designed to cradle each mic and will fit up to eight handheld wireless microphones, eight wireless body pack transmitters and accessories. Convenient finger holes to quickly grab the microphone and easily slide in the body pack transmitters on their side to protect the antenna. An open pocket is perfect to hold mic clips, batteries and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom dual layer foam interior to hold eight wireless mics, body packs and accessories
- Convenient finger slots for easy access
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)
- Automatic ambient pressure equalization value (MIL-STD 810H)
- Resistant to corrosion and impact damage
- Molded-in hinges
- Trigger Latch® System
- Rubber over-molded cushion grip handle
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 9.7 lb | 4.4 kg |
| Exterior Length | 19.875 in | 50.48 cm |
| Exterior Width | 15.5 in | 39.37 cm |
| Exterior Height | 7.875 in | 20.0 cm |
| Carton Length | 20 in | 50.8 cm |
| Carton Width | 16 in | 40.64 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 10.88 lb | 4.94 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
SKB 3i-1813-7WMC iSeries 1813-7 Wireless Eight Mic Case
The 3i-1813-7WMC Wireless Mic case is part of the Waterproof Series of cases with a custom foam interior to protect a variety of brands including Shure and Sennheiser mics to name a few.
This dual layer custom foam interior is designed to cradle each mic and will fit up to eight handheld wireless microphones, eight wireless body pack transmitters and accessories. Convenient finger holes to quickly grab the microphone and easily slide in the body pack transmitters on their side to protect the antenna. An open pocket is perfect to hold mic clips, batteries and other accessories.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom dual layer foam interior to hold eight wireless mics, body packs and accessories
- Convenient finger slots for easy access
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD 810H)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD 810H)
- Automatic ambient pressure equalization value (MIL-STD 810H)
- Resistant to corrosion and impact damage
- Molded-in hinges
- Trigger Latch® System
- Rubber over-molded cushion grip handle
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 9.7 lb | 4.4 kg |
| Exterior Length | 19.875 in | 50.48 cm |
| Exterior Width | 15.5 in | 39.37 cm |
| Exterior Height | 7.875 in | 20.0 cm |
| Carton Length | 20 in | 50.8 cm |
| Carton Width | 16 in | 40.64 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 10.88 lb | 4.94 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
