SKB 3i-13096PC4K iSeries 1309-6 Blackmagic Design Pocket Cinema Camera 4K/6K Case
SKB 3i-13096PC4K iSeries 1309-6 Blackmagic Design Pocket Cinema Camera 4K/6K Case
This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K or 6K with lens attached, lens hood section, two lens slots, and an accessory compartment. (NOTE - Does not fit the 6K Pro or 6K G2. For those models please see our 3i-13096-6KP.)
A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut PE foam to fit the Blackmagic Pocket Cinema Camera 4K or 6K with a longer lens attached, lens hoods, two lenses, and accessories
- Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion, fungus, and impact-resistant (MIL-STD 810H)
- Complete gasket seal makes this case absolutely watertight (MIL-STD-C4150J / IP67)
- Automatic ambient pressure equalization valve (MIL-STD-648C)
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for a customer-supplied padlock
- Trigger Latch® System
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.2 lb | 2.36 kg |
| Exterior Length | 14.73 in | 37.41 cm |
| Exterior Width | 11.94 in | 30.32 cm |
| Exterior Height | 7.31 in | 18.56 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6 lb | 2.72 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
SKB 3i-13096PC4K iSeries 1309-6 Blackmagic Design Pocket Cinema Camera 4K/6K Case
This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K or 6K with lens attached, lens hood section, two lens slots, and an accessory compartment. (NOTE - Does not fit the 6K Pro or 6K G2. For those models please see our 3i-13096-6KP.)
A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut PE foam to fit the Blackmagic Pocket Cinema Camera 4K or 6K with a longer lens attached, lens hoods, two lenses, and accessories
- Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion, fungus, and impact-resistant (MIL-STD 810H)
- Complete gasket seal makes this case absolutely watertight (MIL-STD-C4150J / IP67)
- Automatic ambient pressure equalization valve (MIL-STD-648C)
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for a customer-supplied padlock
- Trigger Latch® System
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.2 lb | 2.36 kg |
| Exterior Length | 14.73 in | 37.41 cm |
| Exterior Width | 11.94 in | 30.32 cm |
| Exterior Height | 7.31 in | 18.56 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6 lb | 2.72 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
SKB 3i-13096PC4K iSeries 1309-6 Blackmagic Design Pocket Cinema Camera 4K/6K Case
This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K or 6K with lens attached, lens hood section, two lens slots, and an accessory compartment. (NOTE - Does not fit the 6K Pro or 6K G2. For those models please see our 3i-13096-6KP.)
A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut PE foam to fit the Blackmagic Pocket Cinema Camera 4K or 6K with a longer lens attached, lens hoods, two lenses, and accessories
- Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion, fungus, and impact-resistant (MIL-STD 810H)
- Complete gasket seal makes this case absolutely watertight (MIL-STD-C4150J / IP67)
- Automatic ambient pressure equalization valve (MIL-STD-648C)
- Molded-in hinge
- Rubber over-molded cushion grip handle
- Locking loops for a customer-supplied padlock
- Trigger Latch® System
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.2 lb | 2.36 kg |
| Exterior Length | 14.73 in | 37.41 cm |
| Exterior Width | 11.94 in | 30.32 cm |
| Exterior Height | 7.31 in | 18.56 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6 lb | 2.72 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
