SKB 3i-13096A74 iSeries 1309-6 Sony A7R IV Series Case
SKB 3i-13096A74 iSeries 1309-6 Sony A7R IV Series Case
This Military-Standard waterproof hard case was designed for photographers who just want to travel with their gear essentials. The interior features custom cut, high quality PE foam that includes space for a Sony A7R IV, A7 III, A7R III, or other A7 camera bodies with lens attached, lens hood section, two lens slots, and accessory pocket. A removable section of foam will allow a 70-200mm lens to stay attached to the camera, and each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The 3i-13096A74 case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Fits Zoom H8 with room for the XYH-6 Z/Y mic capsule, SGH-6 Shotgun mic capsule, and two memory cards
- Space for additional capsules, short cables, or other small accessories
- Waterproof and dust tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger Latch® System
- Accommodates padlocks with 5/16" shackle
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD 810H)
- Resistant to UV
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.2 lb | 2.36 kg |
| Exterior Length | 14.75 in | 37.46 cm |
| Exterior Width | 12 in | 30.48 cm |
| Exterior Height | 7.25 in | 18.41 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6 lb | 2.72 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
SKB 3i-13096A74 iSeries 1309-6 Sony A7R IV Series Case
This Military-Standard waterproof hard case was designed for photographers who just want to travel with their gear essentials. The interior features custom cut, high quality PE foam that includes space for a Sony A7R IV, A7 III, A7R III, or other A7 camera bodies with lens attached, lens hood section, two lens slots, and accessory pocket. A removable section of foam will allow a 70-200mm lens to stay attached to the camera, and each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The 3i-13096A74 case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Fits Zoom H8 with room for the XYH-6 Z/Y mic capsule, SGH-6 Shotgun mic capsule, and two memory cards
- Space for additional capsules, short cables, or other small accessories
- Waterproof and dust tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger Latch® System
- Accommodates padlocks with 5/16" shackle
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD 810H)
- Resistant to UV
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.2 lb | 2.36 kg |
| Exterior Length | 14.75 in | 37.46 cm |
| Exterior Width | 12 in | 30.48 cm |
| Exterior Height | 7.25 in | 18.41 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6 lb | 2.72 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
SKB 3i-13096A74 iSeries 1309-6 Sony A7R IV Series Case
This Military-Standard waterproof hard case was designed for photographers who just want to travel with their gear essentials. The interior features custom cut, high quality PE foam that includes space for a Sony A7R IV, A7 III, A7R III, or other A7 camera bodies with lens attached, lens hood section, two lens slots, and accessory pocket. A removable section of foam will allow a 70-200mm lens to stay attached to the camera, and each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The 3i-13096A74 case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.
SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Fits Zoom H8 with room for the XYH-6 Z/Y mic capsule, SGH-6 Shotgun mic capsule, and two memory cards
- Space for additional capsules, short cables, or other small accessories
- Waterproof and dust tight design (MIL-STD 810H)
- Molded-in hinge for added protection
- Trigger Latch® System
- Accommodates padlocks with 5/16" shackle
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD 810H)
- Resistant to UV
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.2 lb | 2.36 kg |
| Exterior Length | 14.75 in | 37.46 cm |
| Exterior Width | 12 in | 30.48 cm |
| Exterior Height | 7.25 in | 18.41 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6 lb | 2.72 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
