SKB 3i-13096-6KP iSeries Blackmagic Design Pocket Cinema Camera 6K Pro Case
SKB 3i-13096-6KP iSeries Blackmagic Design Pocket Cinema Camera 6K Pro Case
The iSeries 3i-13096-6KP features a custom foam interior that's been form cut to accommodate the Blackmagic Design Pocket Cinema Camera 6K Pro or 6K G2 with lens attached, one additional lens slot, two battery pockets, two SDHC memory card slots, and a compartment for accessories. Lens attached to camera can be up to 7.25" long with a diameter of 3.375" when foam divider is removed. With the foam divider left in, lenses can be up to 5.25" long with a diameter of 3.375". The foam divider left in creates an additional accessory compartment that is 4.25" x 2" x 4.5". The extra lens slot has a diameter of 3.5" and a max depth of 4.75". The extra lens slot comes with two .5" thick ring pads to accommodate shorter lenses. With both ring pads installed the depth changes from 4.75" to 3.75". The main accessory pocket measures 4" x 2.375" x 4.5".
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut foam interior for Blackmagic Pocket Cinema Camera 6K Pro or 6K G2
- Lens slot, battery compartments, memory card slots, and accessory pocket
- Ultra high-strength polypropylene copolymer resin shell
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)
- Complete gasket seal makes the case watertight
- Automatic ambient pressure equalization valve (MIL-STD 810H)
- Molded-in hinges
- Patented Trigger Latch® System
- Accepts SKB's TSA combination padlocks
- Rubber over-molded cushion grip handle
- Lifetime warranty
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.3 lb | 2.4 kg |
| Exterior Length | 14.73 in | 37.41 cm |
| Exterior Width | 11.94 in | 30.32 cm |
| Exterior Height | 7.31 in | 18.56 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6.1 lb | 2.77 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
SKB 3i-13096-6KP iSeries Blackmagic Design Pocket Cinema Camera 6K Pro Case
The iSeries 3i-13096-6KP features a custom foam interior that's been form cut to accommodate the Blackmagic Design Pocket Cinema Camera 6K Pro or 6K G2 with lens attached, one additional lens slot, two battery pockets, two SDHC memory card slots, and a compartment for accessories. Lens attached to camera can be up to 7.25" long with a diameter of 3.375" when foam divider is removed. With the foam divider left in, lenses can be up to 5.25" long with a diameter of 3.375". The foam divider left in creates an additional accessory compartment that is 4.25" x 2" x 4.5". The extra lens slot has a diameter of 3.5" and a max depth of 4.75". The extra lens slot comes with two .5" thick ring pads to accommodate shorter lenses. With both ring pads installed the depth changes from 4.75" to 3.75". The main accessory pocket measures 4" x 2.375" x 4.5".
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut foam interior for Blackmagic Pocket Cinema Camera 6K Pro or 6K G2
- Lens slot, battery compartments, memory card slots, and accessory pocket
- Ultra high-strength polypropylene copolymer resin shell
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)
- Complete gasket seal makes the case watertight
- Automatic ambient pressure equalization valve (MIL-STD 810H)
- Molded-in hinges
- Patented Trigger Latch® System
- Accepts SKB's TSA combination padlocks
- Rubber over-molded cushion grip handle
- Lifetime warranty
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.3 lb | 2.4 kg |
| Exterior Length | 14.73 in | 37.41 cm |
| Exterior Width | 11.94 in | 30.32 cm |
| Exterior Height | 7.31 in | 18.56 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6.1 lb | 2.77 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
SKB 3i-13096-6KP iSeries Blackmagic Design Pocket Cinema Camera 6K Pro Case
The iSeries 3i-13096-6KP features a custom foam interior that's been form cut to accommodate the Blackmagic Design Pocket Cinema Camera 6K Pro or 6K G2 with lens attached, one additional lens slot, two battery pockets, two SDHC memory card slots, and a compartment for accessories. Lens attached to camera can be up to 7.25" long with a diameter of 3.375" when foam divider is removed. With the foam divider left in, lenses can be up to 5.25" long with a diameter of 3.375". The foam divider left in creates an additional accessory compartment that is 4.25" x 2" x 4.5". The extra lens slot has a diameter of 3.5" and a max depth of 4.75". The extra lens slot comes with two .5" thick ring pads to accommodate shorter lenses. With both ring pads installed the depth changes from 4.75" to 3.75". The main accessory pocket measures 4" x 2.375" x 4.5".
All SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-STD 810H) that is resistant to corrosion and impact damage. Standard features include a molded-in hinge, padlock loops, Trigger Latch® System, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD 810H), and resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD 810H).
General Features:
- Custom cut foam interior for Blackmagic Pocket Cinema Camera 6K Pro or 6K G2
- Lens slot, battery compartments, memory card slots, and accessory pocket
- Ultra high-strength polypropylene copolymer resin shell
- Resistant to UV, solvents, corrosion, fungus, and impact damage (MIL-STD 810H)
- Complete gasket seal makes the case watertight
- Automatic ambient pressure equalization valve (MIL-STD 810H)
- Molded-in hinges
- Patented Trigger Latch® System
- Accepts SKB's TSA combination padlocks
- Rubber over-molded cushion grip handle
- Lifetime warranty
Specifications:
| Exterior | Hard | |
| Built In Wheels or Casters | No | |
| Product Weight | 5.3 lb | 2.4 kg |
| Exterior Length | 14.73 in | 37.41 cm |
| Exterior Width | 11.94 in | 30.32 cm |
| Exterior Height | 7.31 in | 18.56 cm |
| Carton Length | 15.5 in | 39.37 cm |
| Carton Width | 12.5 in | 31.75 cm |
| Carton Height | 8 in | 20.32 cm |
| Shipping Weight | 6.1 lb | 2.77 kg |
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
