🎉 Up to 70% Off Selected ItemsShop Sale
1 / 5
Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm
Rockford Fosgate Punch P500X1BD 500W RMS Punch Series Monoblock Class D Car Power Amplifier
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-ohm load. The Class-BD technology produces bass more efficiently than traditional amps, and its frequency response allows it to be optimized for subwoofers.
General Features:
- Punch BD Series Monoblock Class BD Car Amplifier
- RMS Power Rating:Â 4 ohms: 150 watts x 1 channelÂ
- RMS Power Rating:Â 2 ohms: 300 watts x 1 channel
- RMS Power Rating:Â 1 ohm: 500 watts x 1 channel
- CEA-2006 compliant amplifier
- MOSFET power supply
- Muted turn-on.
- Cast aluminum heatsink.
- 12dB/octave Butterworth crossover
- Stealth top-mounted control panel
- LED power, thermal, and protection indicators.
- Nickel-plated captive C-clamp terminals.
- Ultra-efficient Class BD circuitry to maximize amplifier power efficiency.
- On-board differential inputs eliminate noise picked up by the signal cable.
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
- MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span.
- Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
- Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low.
- DSM (Discrete Surface Mounted Components) utilizes 1% tight tolerances, improving the circuit's efficiency and lowering the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers.
- Input sensitivity: 150mV - 12V
- On-board Punch EQ with +18dB boost @ 45Hz.
- Variable low-pass filter: 50-250 Hz
- Selectable infrasonic filter: off / 28 Hz
- Frequency response: 20 - 250 Hz
- Total Harmonic Distortion: <1.0%
- Dimensions: 11"L x 7-3/4"W x 2-3/8"H
- 8 AWG to 18 AWG speaker wire output terminals
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
What is in the P500X1bd box?
- Mono subwoofer amplifier
- Four 1-1/2" Self-tapping screws
- 2.5mm Allen wrench
- Quick setup instructions
- Certificate of Performance
- P500X1bd owner's manual
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Rockford Fosgate Punch P500X1BD 500W RMS Punch Series Monoblock Class D Car Power Amplifier
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-ohm load. The Class-BD technology produces bass more efficiently than traditional amps, and its frequency response allows it to be optimized for subwoofers.
General Features:
- Punch BD Series Monoblock Class BD Car Amplifier
- RMS Power Rating:Â 4 ohms: 150 watts x 1 channelÂ
- RMS Power Rating:Â 2 ohms: 300 watts x 1 channel
- RMS Power Rating:Â 1 ohm: 500 watts x 1 channel
- CEA-2006 compliant amplifier
- MOSFET power supply
- Muted turn-on.
- Cast aluminum heatsink.
- 12dB/octave Butterworth crossover
- Stealth top-mounted control panel
- LED power, thermal, and protection indicators.
- Nickel-plated captive C-clamp terminals.
- Ultra-efficient Class BD circuitry to maximize amplifier power efficiency.
- On-board differential inputs eliminate noise picked up by the signal cable.
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
- MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span.
- Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
- Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low.
- DSM (Discrete Surface Mounted Components) utilizes 1% tight tolerances, improving the circuit's efficiency and lowering the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers.
- Input sensitivity: 150mV - 12V
- On-board Punch EQ with +18dB boost @ 45Hz.
- Variable low-pass filter: 50-250 Hz
- Selectable infrasonic filter: off / 28 Hz
- Frequency response: 20 - 250 Hz
- Total Harmonic Distortion: <1.0%
- Dimensions: 11"L x 7-3/4"W x 2-3/8"H
- 8 AWG to 18 AWG speaker wire output terminals
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
What is in the P500X1bd box?
- Mono subwoofer amplifier
- Four 1-1/2" Self-tapping screws
- 2.5mm Allen wrench
- Quick setup instructions
- Certificate of Performance
- P500X1bd owner's manual
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
$429.99
Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm—
$429.99
Description
Rockford Fosgate Punch P500X1BD 500W RMS Punch Series Monoblock Class D Car Power Amplifier
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-ohm load. The Class-BD technology produces bass more efficiently than traditional amps, and its frequency response allows it to be optimized for subwoofers.
General Features:
- Punch BD Series Monoblock Class BD Car Amplifier
- RMS Power Rating:Â 4 ohms: 150 watts x 1 channelÂ
- RMS Power Rating:Â 2 ohms: 300 watts x 1 channel
- RMS Power Rating:Â 1 ohm: 500 watts x 1 channel
- CEA-2006 compliant amplifier
- MOSFET power supply
- Muted turn-on.
- Cast aluminum heatsink.
- 12dB/octave Butterworth crossover
- Stealth top-mounted control panel
- LED power, thermal, and protection indicators.
- Nickel-plated captive C-clamp terminals.
- Ultra-efficient Class BD circuitry to maximize amplifier power efficiency.
- On-board differential inputs eliminate noise picked up by the signal cable.
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
- MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span.
- Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
- Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low.
- DSM (Discrete Surface Mounted Components) utilizes 1% tight tolerances, improving the circuit's efficiency and lowering the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers.
- Input sensitivity: 150mV - 12V
- On-board Punch EQ with +18dB boost @ 45Hz.
- Variable low-pass filter: 50-250 Hz
- Selectable infrasonic filter: off / 28 Hz
- Frequency response: 20 - 250 Hz
- Total Harmonic Distortion: <1.0%
- Dimensions: 11"L x 7-3/4"W x 2-3/8"H
- 8 AWG to 18 AWG speaker wire output terminals
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
What is in the P500X1bd box?
- Mono subwoofer amplifier
- Four 1-1/2" Self-tapping screws
- 2.5mm Allen wrench
- Quick setup instructions
- Certificate of Performance
- P500X1bd owner's manual
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
