
AUTOTEK MM-3025.4D 3000 Watt Compact Bridgeable 4 Channel Amplifier

AUTOTEK MM-3025.4D 3000 Watt Compact Bridgeable 4 Channel Amplifier
General Features:
-
3,000-Watt Max Power
-
4 Channels X 750 Watts At 2 Ohms
-
4 Channels X 375 Watts At 4 Ohms
-
2 Channels Mono Bridged X 1,500 Watts
- Aftermarket Class D Amp Replaces Or Supplements Vehicle’s Existing OEM Amp To
-
Power Car’s Stereo Speakers
-
Can Run In 4-channel or bridged mono Mode
-
Drives Additional Power With A Small Footprint
-
Frequency Response: 10 Hz To 22 Khz
-
Total Harmonic Distortion (THD) Less Than 0.05%
- Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High Speed Mosfets Bring
-
Extreme Power With High Sound Quality And Minimum Distortion Levels
- Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display
-
And Showcase For Every Car Audio Installation
- Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure
-
Connection While Resisting Corrosion
- Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And
-
Secure Connections
- Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low
-
Voltage Circuit, Which Delivers Minimal Distortion Through Amplification Process
-
RCA Preamp Audio Outputs And Speaker Level Audio Inputs
-
RCA Inputs And Outputs Provide the Highest Sound Quality Connection
- Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The
- "Output" RCA Connections, Which Minimize The Need For Additional Cables
-
Running The Length Of The Vehicle, Minimizing Noise
-
Onboard Variable Electronic Crossover 12 Db Per Octave
-
Built-In Bass Control
-
Amp Variable Low Pass: 40 Hz To 400 Hz
- High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal
-
Impact On Electrical System
- Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp
-
End Panel
-
Power Terminal 12-Volt/Gnd: 4 Awg
-
Speaker Terminal Wire Gauge: 12 Awg
-
Amp Fusing: External 80 Amps
-
Dimensions: 16 In. X 7 In. X 3.25 In.
-
Includes Mounting Hardware And Manual
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

AUTOTEK MM-3025.4D 3000 Watt Compact Bridgeable 4 Channel Amplifier
General Features:
-
3,000-Watt Max Power
-
4 Channels X 750 Watts At 2 Ohms
-
4 Channels X 375 Watts At 4 Ohms
-
2 Channels Mono Bridged X 1,500 Watts
- Aftermarket Class D Amp Replaces Or Supplements Vehicle’s Existing OEM Amp To
-
Power Car’s Stereo Speakers
-
Can Run In 4-channel or bridged mono Mode
-
Drives Additional Power With A Small Footprint
-
Frequency Response: 10 Hz To 22 Khz
-
Total Harmonic Distortion (THD) Less Than 0.05%
- Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High Speed Mosfets Bring
-
Extreme Power With High Sound Quality And Minimum Distortion Levels
- Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display
-
And Showcase For Every Car Audio Installation
- Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure
-
Connection While Resisting Corrosion
- Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And
-
Secure Connections
- Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low
-
Voltage Circuit, Which Delivers Minimal Distortion Through Amplification Process
-
RCA Preamp Audio Outputs And Speaker Level Audio Inputs
-
RCA Inputs And Outputs Provide the Highest Sound Quality Connection
- Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The
- "Output" RCA Connections, Which Minimize The Need For Additional Cables
-
Running The Length Of The Vehicle, Minimizing Noise
-
Onboard Variable Electronic Crossover 12 Db Per Octave
-
Built-In Bass Control
-
Amp Variable Low Pass: 40 Hz To 400 Hz
- High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal
-
Impact On Electrical System
- Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp
-
End Panel
-
Power Terminal 12-Volt/Gnd: 4 Awg
-
Speaker Terminal Wire Gauge: 12 Awg
-
Amp Fusing: External 80 Amps
-
Dimensions: 16 In. X 7 In. X 3.25 In.
-
Includes Mounting Hardware And Manual
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Original: $159.99
-65%$159.99
$56.00Description

AUTOTEK MM-3025.4D 3000 Watt Compact Bridgeable 4 Channel Amplifier
General Features:
-
3,000-Watt Max Power
-
4 Channels X 750 Watts At 2 Ohms
-
4 Channels X 375 Watts At 4 Ohms
-
2 Channels Mono Bridged X 1,500 Watts
- Aftermarket Class D Amp Replaces Or Supplements Vehicle’s Existing OEM Amp To
-
Power Car’s Stereo Speakers
-
Can Run In 4-channel or bridged mono Mode
-
Drives Additional Power With A Small Footprint
-
Frequency Response: 10 Hz To 22 Khz
-
Total Harmonic Distortion (THD) Less Than 0.05%
- Road Worthy Tcid (Twin Coil Isolation Design) And Pro-Fi High Speed Mosfets Bring
-
Extreme Power With High Sound Quality And Minimum Distortion Levels
- Heavy-Duty Aluminum Alloy Heatsink With Illuminated Logo Adds A Vibrant Display
-
And Showcase For Every Car Audio Installation
- Nickel-Plated Brass Connection With Hex Set Screw Terminals For Secure
-
Connection While Resisting Corrosion
- Angled Allen Key Connectors Provide Easy Access For Hand Tools For Quick And
-
Secure Connections
- Maximum Low Voltage Signal From Source Unit Comes Into Amp Through Low
-
Voltage Circuit, Which Delivers Minimal Distortion Through Amplification Process
-
RCA Preamp Audio Outputs And Speaker Level Audio Inputs
-
RCA Inputs And Outputs Provide the Highest Sound Quality Connection
- Full-Range Signal Pass Through Output Allows Additional Amps To Be Run From The
- "Output" RCA Connections, Which Minimize The Need For Additional Cables
-
Running The Length Of The Vehicle, Minimizing Noise
-
Onboard Variable Electronic Crossover 12 Db Per Octave
-
Built-In Bass Control
-
Amp Variable Low Pass: 40 Hz To 400 Hz
- High Energy Pulse Width Modulated Power Supply Delivers Power With Minimal
-
Impact On Electrical System
- Monitor-Overload And Speaker-Short Protection With Lighted Indicators On Amp
-
End Panel
-
Power Terminal 12-Volt/Gnd: 4 Awg
-
Speaker Terminal Wire Gauge: 12 Awg
-
Amp Fusing: External 80 Amps
-
Dimensions: 16 In. X 7 In. X 3.25 In.
-
Includes Mounting Hardware And Manual
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.






















