ART PROCHANNELIII Multivoice Channel Strip
ART PROCHANNELIII Multivoice Channel Strip
The Pro Channel III is a fully-featured channel strip with selectable mic impedance, two compression voicings, and semi-parametric EQ.
New to this version, the compressor has both Tube/Opto and FET modes for smooth or punchy dynamic control. The compressor and EQ sections can now be reordered at the touch of a button, and the front panel has been streamlined for a faster, simpler workflow.
The mic preamp features a discrete FET input stage and up to 60 dB of preamp gain, with a variable low cut filter to eliminate rumble and tighten bass.
The EQ section offers a switchable low shelf frequency, variable low-mid and high-mid frequencies with over 4 octaves of range per band, and a 12 kHz high shelf.
The Pro Channel III is also a versatile instrument DI. Connecting to the front 1/4 input will override the rear XLR input so you can record direct tracks without disconnecting your mic or line signal.
Designed for recording musicians seeking a versatile character preamp with real tube warmth, the Pro Channel III offers the flexibility and fidelity to sculpt and enhance any source.
General Features:
- Class A FET Microphone Preamp
- Selectable Microphone Impedance
- 1/4" High Z Input on Front Panel
- Compressor and EQ Sections with Switchable Order and Independent Bypass
- Tube/Opto and FET Compressor Voicings
- 4-Band Semi-Parametric EQ and Variable Low Cut Filter
- Insert Point after Preamp Stage
- +4 dBu or -10 dBv Operation
- Universal Internal Power Supply
Specifications:
| Input Impedance | 600Ω / 47 kΩ (XLR) >800 kΩ (Instrument) 7.5 kΩ (Insert) |
| Output Impedance | < 47Ω (XLR) |
| Maximum Input Level | +22 dBu (+4dBu Mode) +13 dBu (-10dBV Mode) Balanced |
| Maximum Output Level | +26dBu (Balanced), +20dBu (Unbalanced) |
| Maximum Gain | 40dB Variable Input Gain 20dB Switchable Boost , 15dB Variable Output Gain |
| Frequency Response | 12Hz to 100kHz (+0, -1dB) |
| Total Harmonic Distortion | >90dB |
| Equivalent Input Noise | -128dBu (Mic / Line) -109dBu (Instrument) |
| CMRR | >90dB |
| Power Requirements | 100 – 240V 50Hz / 60 Hz 25W |
| Dimensions (HWD) | 3.5” x 19” x 9.2”, 8.9cm x 48.3cm x 23.3cm |
| Weight | 10.5lbs / 4.76kg |
**Specifications subject to change without notice
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
ART PROCHANNELIII Multivoice Channel Strip
The Pro Channel III is a fully-featured channel strip with selectable mic impedance, two compression voicings, and semi-parametric EQ.
New to this version, the compressor has both Tube/Opto and FET modes for smooth or punchy dynamic control. The compressor and EQ sections can now be reordered at the touch of a button, and the front panel has been streamlined for a faster, simpler workflow.
The mic preamp features a discrete FET input stage and up to 60 dB of preamp gain, with a variable low cut filter to eliminate rumble and tighten bass.
The EQ section offers a switchable low shelf frequency, variable low-mid and high-mid frequencies with over 4 octaves of range per band, and a 12 kHz high shelf.
The Pro Channel III is also a versatile instrument DI. Connecting to the front 1/4 input will override the rear XLR input so you can record direct tracks without disconnecting your mic or line signal.
Designed for recording musicians seeking a versatile character preamp with real tube warmth, the Pro Channel III offers the flexibility and fidelity to sculpt and enhance any source.
General Features:
- Class A FET Microphone Preamp
- Selectable Microphone Impedance
- 1/4" High Z Input on Front Panel
- Compressor and EQ Sections with Switchable Order and Independent Bypass
- Tube/Opto and FET Compressor Voicings
- 4-Band Semi-Parametric EQ and Variable Low Cut Filter
- Insert Point after Preamp Stage
- +4 dBu or -10 dBv Operation
- Universal Internal Power Supply
Specifications:
| Input Impedance | 600Ω / 47 kΩ (XLR) >800 kΩ (Instrument) 7.5 kΩ (Insert) |
| Output Impedance | < 47Ω (XLR) |
| Maximum Input Level | +22 dBu (+4dBu Mode) +13 dBu (-10dBV Mode) Balanced |
| Maximum Output Level | +26dBu (Balanced), +20dBu (Unbalanced) |
| Maximum Gain | 40dB Variable Input Gain 20dB Switchable Boost , 15dB Variable Output Gain |
| Frequency Response | 12Hz to 100kHz (+0, -1dB) |
| Total Harmonic Distortion | >90dB |
| Equivalent Input Noise | -128dBu (Mic / Line) -109dBu (Instrument) |
| CMRR | >90dB |
| Power Requirements | 100 – 240V 50Hz / 60 Hz 25W |
| Dimensions (HWD) | 3.5” x 19” x 9.2”, 8.9cm x 48.3cm x 23.3cm |
| Weight | 10.5lbs / 4.76kg |
**Specifications subject to change without notice
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Description
ART PROCHANNELIII Multivoice Channel Strip
The Pro Channel III is a fully-featured channel strip with selectable mic impedance, two compression voicings, and semi-parametric EQ.
New to this version, the compressor has both Tube/Opto and FET modes for smooth or punchy dynamic control. The compressor and EQ sections can now be reordered at the touch of a button, and the front panel has been streamlined for a faster, simpler workflow.
The mic preamp features a discrete FET input stage and up to 60 dB of preamp gain, with a variable low cut filter to eliminate rumble and tighten bass.
The EQ section offers a switchable low shelf frequency, variable low-mid and high-mid frequencies with over 4 octaves of range per band, and a 12 kHz high shelf.
The Pro Channel III is also a versatile instrument DI. Connecting to the front 1/4 input will override the rear XLR input so you can record direct tracks without disconnecting your mic or line signal.
Designed for recording musicians seeking a versatile character preamp with real tube warmth, the Pro Channel III offers the flexibility and fidelity to sculpt and enhance any source.
General Features:
- Class A FET Microphone Preamp
- Selectable Microphone Impedance
- 1/4" High Z Input on Front Panel
- Compressor and EQ Sections with Switchable Order and Independent Bypass
- Tube/Opto and FET Compressor Voicings
- 4-Band Semi-Parametric EQ and Variable Low Cut Filter
- Insert Point after Preamp Stage
- +4 dBu or -10 dBv Operation
- Universal Internal Power Supply
Specifications:
| Input Impedance | 600Ω / 47 kΩ (XLR) >800 kΩ (Instrument) 7.5 kΩ (Insert) |
| Output Impedance | < 47Ω (XLR) |
| Maximum Input Level | +22 dBu (+4dBu Mode) +13 dBu (-10dBV Mode) Balanced |
| Maximum Output Level | +26dBu (Balanced), +20dBu (Unbalanced) |
| Maximum Gain | 40dB Variable Input Gain 20dB Switchable Boost , 15dB Variable Output Gain |
| Frequency Response | 12Hz to 100kHz (+0, -1dB) |
| Total Harmonic Distortion | >90dB |
| Equivalent Input Noise | -128dBu (Mic / Line) -109dBu (Instrument) |
| CMRR | >90dB |
| Power Requirements | 100 – 240V 50Hz / 60 Hz 25W |
| Dimensions (HWD) | 3.5” x 19” x 9.2”, 8.9cm x 48.3cm x 23.3cm |
| Weight | 10.5lbs / 4.76kg |
**Specifications subject to change without notice
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
