2 Alpine S-W10D4 1800W 10" S-Series Dual 4 Ohm Car Subwoofer
2 Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer
Alpine introduces the all-new S-Series subwoofers, featuring a unique design that substantially improves bass output and provides installation versatility. Each S-Series subwoofer features a custom-stamped steel frame and is available in three sizes: twelve, ten, and eight inches. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They feature frame leg vents, a vented back plate to aid in cooling the subwoofer's voice coil and motor parts, and a shallow design to accommodate smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals, featuring a dual voice coil jumper system, will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
- 10" 4 ohm S-Series (Type-S) Subwoofer
- RMS Power Handling: 600 watts
- Peak Power Handling: 1800 watts
- Recommended power range: 250- 600W RMS
- Pulp/Kevlar Cone
- High Amplitude Multi-Roll (HAMR) Surround
- Progressive Spider with Reinforced Layer Tinsel Leads
- Airflow Optimized Dual Flare Pole Vent
- High Strength Steel Frame Basket
- 8 AWG Push Terminals with VC Configuration Jumpers
- Dual Voice Coil
- High-Grade Strontium Ferrite Magnets
- Top-mount depth: 4-11/16"
- Cutout diameter: 8-13/16
- Frequency Response: 26- 200Hz
- Sensitivity: 86.4dB
- Resonance Frequency (Fs): 33 Hz
- Authorized Dealer
- 1-year Manufacturer's Warranty
What's in the S-W10D4 package:
- S-W10D4 owner's manual
- One 10" Dual 4-ohm voice coil subwoofer
- Two 3" jumper cables
- Subwoofer Application Guide
- Online product registration information
- Warranty information
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
2 Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer
Alpine introduces the all-new S-Series subwoofers, featuring a unique design that substantially improves bass output and provides installation versatility. Each S-Series subwoofer features a custom-stamped steel frame and is available in three sizes: twelve, ten, and eight inches. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They feature frame leg vents, a vented back plate to aid in cooling the subwoofer's voice coil and motor parts, and a shallow design to accommodate smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals, featuring a dual voice coil jumper system, will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
- 10" 4 ohm S-Series (Type-S) Subwoofer
- RMS Power Handling: 600 watts
- Peak Power Handling: 1800 watts
- Recommended power range: 250- 600W RMS
- Pulp/Kevlar Cone
- High Amplitude Multi-Roll (HAMR) Surround
- Progressive Spider with Reinforced Layer Tinsel Leads
- Airflow Optimized Dual Flare Pole Vent
- High Strength Steel Frame Basket
- 8 AWG Push Terminals with VC Configuration Jumpers
- Dual Voice Coil
- High-Grade Strontium Ferrite Magnets
- Top-mount depth: 4-11/16"
- Cutout diameter: 8-13/16
- Frequency Response: 26- 200Hz
- Sensitivity: 86.4dB
- Resonance Frequency (Fs): 33 Hz
- Authorized Dealer
- 1-year Manufacturer's Warranty
What's in the S-W10D4 package:
- S-W10D4 owner's manual
- One 10" Dual 4-ohm voice coil subwoofer
- Two 3" jumper cables
- Subwoofer Application Guide
- Online product registration information
- Warranty information
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
Original: $455.90
-65%$455.90
$159.56Description
2 Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer
Alpine introduces the all-new S-Series subwoofers, featuring a unique design that substantially improves bass output and provides installation versatility. Each S-Series subwoofer features a custom-stamped steel frame and is available in three sizes: twelve, ten, and eight inches. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They feature frame leg vents, a vented back plate to aid in cooling the subwoofer's voice coil and motor parts, and a shallow design to accommodate smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals, featuring a dual voice coil jumper system, will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
- 10" 4 ohm S-Series (Type-S) Subwoofer
- RMS Power Handling: 600 watts
- Peak Power Handling: 1800 watts
- Recommended power range: 250- 600W RMS
- Pulp/Kevlar Cone
- High Amplitude Multi-Roll (HAMR) Surround
- Progressive Spider with Reinforced Layer Tinsel Leads
- Airflow Optimized Dual Flare Pole Vent
- High Strength Steel Frame Basket
- 8 AWG Push Terminals with VC Configuration Jumpers
- Dual Voice Coil
- High-Grade Strontium Ferrite Magnets
- Top-mount depth: 4-11/16"
- Cutout diameter: 8-13/16
- Frequency Response: 26- 200Hz
- Sensitivity: 86.4dB
- Resonance Frequency (Fs): 33 Hz
- Authorized Dealer
- 1-year Manufacturer's Warranty
What's in the S-W10D4 package:
- S-W10D4 owner's manual
- One 10" Dual 4-ohm voice coil subwoofer
- Two 3" jumper cables
- Subwoofer Application Guide
- Online product registration information
- Warranty information
Warning:
This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
